Tuesday, 6 December 2016

Simple Christmas Card

Oh my gosh.... where has this year gone? It's nearly Christmas already!!!
Hi there Antony here, I've made a really simple card using a few bits and bobs I had
laying round. I even used some freebies from a few craft magazines too!


So here's what I've used to make this card. Glossy card stock and alcohol inks in various
colours, gold mirror board, ice blue colour stamping ink, Centura Pearl card, white card
a free embossing folder and a free snowflake die as well as some Crafters Companions
snowflake dies and a very pretty "Let it Snow" die from the Sue Wilson range!


Step 1 Firstly I cut a large solid snowflake shape and using an ice blue colour stamp pad
and a sponge, I coloured the outer edge of it. I then used the detailed die of the
same snowflake design and cut out the snowflake using gold mirror board.
I then glued the gold mirror board snowflake on top of the solid shape with the blue
outer edge using Pinflairs Glue-it glue. I applied the glue using a sponge to the
backside of the gold snowflake.


 Step 2 Using 2 A4 sheets of 300gsm white card stock, I cut out an 8 inch card blank.


Step 3 Still using the 300gsm white card stock I also cut out one large detailed snowflake.
I then used a clear stamping pad over the cut out snowflake and sprinkled some
clear WOW! embossing powder over it. I then heated it, to give it a beautiful glossy
finish. I also cut some smaller gold snowflakes using dies from Crafters Companions range. 

  
Step 4 Next was the slightly messier part... alcohol ink! I randomly pounced a felt
pad loaded with alcohol ink and effects solution (plain alcohol) onto a sheet of glossy
card stock. Then I dripped effect solution onto the glossy card and let the solution
bleed into the colours for further effect. Then using a sheet of Centura Pearl, I cut
out a large snowflake design using a Create a Card die from Crafters Companion.
I cut this Create a Card die cut out with about a 5mm border all the way round.
I then placed the alcohol inks background behind the die cut and glued it in position.
Once again I cut an even border all the way round using a ruler and craft knife.
I stuck this onto a piece of gold mirror board and once again went round to
create an even border.


Step 5 Using a free embossing folder from a craft magazine, I embossed some
300gsm white card. Using the same ice blue ink pad, I used a sponge and lightly
went over the raised areas to bring out the texture. I then cut out the embossed
pieces of card and mounted them onto some gold mirror board to give them a
border, top and bottom.



Step 6 Using the Sue Wilson die "Let it Snow" I cut out 3 different versions.
Two on 300gsm white card stock (one which I coloured blue) and one cut
out using gold mirror board. I then created a shadow effect by layering up the die
cut shapes (a trick that I learnt from Samantha... just don't tell her!!)
You may need to practice this effect first, it's not that easy. You need each
new layer to be offset at 45 degrees and about 1mm distance from the
previous layer. To stick all the layers together I used Pinflairs Glue-it glue.


Step 7 With all the elements cut out I decided that before I glued them onto the card
blank that I lightly go round the edge of the card with the ice blue stamp pad.
This was to help tie it in with the embossed borders and large snowflake with
the same ice blue colouring.
First to be stuck into position was the embossed borders with gold mirror board
borders, then came the alcohol ink background and snow flake. Then after an
awful lot of moving things around, I stuck on the WOW! embossing powdered
snowflake. So far all the elements were stuck on using Pinflairs Glue-it glue.
Next came a bit of dimension. All the other snowflake die cuts and the
"Let it Snow" die cut were stuck on using silicone glue.
Well that wraps up this years blog posts! I hope you've enjoyed this rather
simple Christmas card as much as I enjoyed creating it, as well as all the other
posts though out the year too!
From both myself and Samantha we would like to wish all our crafting
friends a very Merry Christmas and best wishes for 2017!

Until next time, Happy Crafting!

 
Samantha and Antony